2011 Hustler Turf X-ONE™ Kawasaki FX 31 hp/54"

$5,300.00 - Stock Number: 11010358

Sudbury, MA

Used 54" X-One FX850 31HP, Excellent Condition! 1768 Hours. PRICED TO SELL!

Specifications

Engine
Air Cleaner System Heavy-duty air cleaner to extend the service interval for excessive, dirty applications and improved performance
Charging System 12-volt (see engine manufacturer specs)
Cooling Air cooled. Fly-wheel fan
Final Drive Direct-drive high-torque wheel motors. One for each drive wheel. Parker TFO24O
Fuel Unleaded gasoline (see engine manufacturer specs)
Fuel Capacity 10.4 US gal (37.85 l)
Governor Mechanical
Ignition Electronic
Starter 12-volt
Chassis
Brake (Service) Hydrostatic dynamic braking
Drive Tires 23 x 9.5 – 12
Steering SmoothTrak™ twin-lever steering provides independent control of each drive wheel. Speed, forward, reverse, brake, and turns are all controlled with hand-operated controls
Tires Front 13 x 6.5 – 6, rib tread
Turning Radius True zero turning radius. Turns within its own length. Counter-rotating, independent drive wheels
Dimensions
Blade 18.5 in x 2.5 in x .20 in
Blade Tip Speed (at 3600 RPM engine speed) Side Discharge 18340 fpm; Rear Discharge 18,580 fpm
Height (With ROPS folded) 53.00 in (133.35 cm ); (With ROPS up) 71.25 in (172.47 cm )
Length 80.8 in (205.23 cm)
Overall Width 59.25 in (150.50 cm) w/discharge chute up
Spindles Ductile iron casting with steel shafts and sealed ball bearings
Trim Capacity 2.5 in (6.5cm) w/9.5 in tire = 4.75 in (12.06 cm)
Weight 1210 lbs (548 kg)
Width (Tire-to-Tire) 47 in (129.54 cm)
General Information
Blade type (Mowing) Heavy-duty, heat-treated, high-lift steel Fusion™ blades. Fusion blades feature an exclusive electro-fusion technology that creates an ultra-hard layer at the blade’s cutting edge, the blade remains sharp and continues to give a clean cut far longer than any blade on the market.
Construction Main frame is 1.5 in x 2.0 in x .188 in square steel tubing. Front caster wheels mounted with sealed ball bearings on each wheel. Front caster forks are .375 in (.95 cm) steel
Control Hand-operated choke, throttle, ignition switch, electric mower clutch. Integrated parking brakes
Cupholder molded into the left side fuel tank.
Cutting Height Foot-operated deck height adjustment. Pin for setting height, detent for transport position. Height adjustment in .25 in increments from 1.0 in to 5.5 in (3.81 cm to 13.97 cm)
Cutting Width (Side Discharge) 53.25 in; (Rear Discharge) 53.10 in
Deck Free-floating mower deck using three blades with center blade to the front. Includes 3 deck-mounted rollers to improve flotation in rolling and uneven terrain
Deck Construction Welded steel. Solid 1.5 in x .375 (2.55 cm x .95 cm) steel bars reinforce impact areas on trim edges. Commercial style, box section reinforced front edge. Reinforcements welded onto spindle mount areas. High density, rubberized discharge chute.
Deck Drive Single V-belt drive from engine with electric clutch to all three spindles. Spring tension idler and large pulleys to extend belt life.
Deck Lift Raise and lower deck from driver’s seat with simple foot-operated deck height adjustment. Pin for setting height, transport position. Change cutting heights, climbing curbs and trailer more easily.
Drive System (Traction Type) Dual hydrostatic. Individual pumps power two direct-drive wheel motors. Hydrostatic system operates on 20W50 motor oil.
Filter (Fuel) Replaceable, automotive-type; Internal
Ground Speed (Forward) Infinitely variable: 0-11 mph; (Reverse) 0-6 mph
Hydraulics (Lines) Stainless-steel, high-pressure lines with Parker SealLokTM O-Ring Face-Seal fittings.
Lighting (Indicators) Engine warning light (low oil pressure)
Other (Safety Features) Standard foldable ROPS with seat belt. Operator presence system connected to seat, deck clutch and park brake switches. Stabilizer wheels at rear of lawn mower. Side discharge deck with discharge chute and rear discharge deck with deflectors
Parking Brake Automotive-style drum brakes. When steering levers are placed in park position, integral park brakes are automatically engaged.
Pump Two variable displacement, axial-piston type. Each powers one drive-wheel motor. Hydro-Gear PK 12cc
ROPS Certified, 2-post, foldable with seatbelt.
Seat Deluxe vinyl seat with armrests. Fore and aft sliding adjustment.
Warranty Limited Lifetime warranty on the leading edge of the deck; Limited Lifetime warranty on mower frame; A limited 2-year
Hydraulics
Pump Type (Drive) V-belt drive from engine crankshaft

Features

All

  • "Drive-straight" adjustment
  • 10.4 - gallon fuel capacity with built-in sight line
  • 48", 54", or 60" decks with VX4 technology
  • 54" and 60" rear discharge decks
  • Commercial duty deck spindles
  • Foldable certified ROPS and seat belt
  • Heavy-duty air cleaner for increased engine protection
  • Heavy-duty, 7-gauge, full-height rear bumper provides protection for the engine and exhaust, retains the ease of maintenance
  • Kawasaki and Kohler Commercial V-twin engines
  • Low center of gravity for stability
  • Proven separate pumps and motors
  • Simplest maintenance in the industry
  • SmoothTrakTM steering with patented automatic park brake system
  • Standard hour meter
  • Top speed of 11mph
  • Toughest frame, front forks, and deck in the industry

Product Media

2011 Hustler Turf X-ONE™ Kawasaki FX 31 hp/54"